Level Measurement – The Basics

When it comes to the measurement of levels in a laboratory, there are a number of different methods that can be used including the hydrostatic pressure, the dynamic level, and the permeability test. In most cases, these three measurements are performed using the same equipment, but there are instances when a distinction needs to be made between the different measurements. This article will briefly discuss some of the different types of level measurement and how they are best utilized. Read more – https://www.semrad.com.au/products/level-transmitters-level-measurement

Level Measurement

The hydrostatic pressure is one type of level measurement where a constant pressure is applied to a fixed mass or object and the distance between the points of low pressure and high pressure is determined. This method measures the level of liquid and other solids and fluids that display an upper to lower surface pressure. The distance between these two categories is called the level measurement’s interface. A continuous vessel level measurement on the other hand is performed when a measuring vessel is completely filled with water. During this measurement, a continuous flow of fluid is measured, and the measurement of the volume of the fluid is taken over the course of a period of time, which is called a recording time.

While these two different types of level measurement are just a few examples, there are many other types of level measurement that may be utilized in the scientific and engineering fields. Some of these include the mechanical parallelism method, the hydrometer, the electrical conductivity meter, the hydrometer probe, and the gas flow meter. Each of these different types of level measurement has its own advantages as well as disadvantages, so it is important to understand them before selecting the method that is best suited for the measurement process that is being performed. Some examples of these types of devices include ultrasonic level sensors, gas gauge, electrical conductivity meters, and gas flow meters.

Level Switch, Transmitter & Measurement SEMRAD

27e/1-3 Endeavour Rd, Caringbah NSW 2229

(02) 9531 8474

https://www.semrad.com.au/

When it comes to the measurement of levels in a laboratory, there are a number of different methods that can be used including the hydrostatic pressure, the dynamic level, and the permeability test. In most cases, these three measurements are performed using the same equipment, but there are instances when a distinction needs to be…